ARINC 429 Test
|Results 1 - 18 of 18||Promote Your Products|
PC429 - ARINC 429 Databus Analyzers The PC429-X is an ISA PC bus compatible ARINC 429 Transmitter/Receiver card that requires minimal support once set up. The card requires an 8-bit ISA full size slot in the host computer and is mapped into the I/O portion of host address space (switch selectable) for easy system integration. It can be ordered with one to four channel pairs.
M4K429RTx - ARINC-429 Multi-Channel Test & Simulation Module The M4K429RTx is an ARINC-429 multi-channel test and simulation module to be used on the Excalibur 4000 family of carrier boards. The module supports up to ten ARINC-429 channels in any combination of transmitters and receivers. Each of these channels feature error injection and detection capabilities
USB429win - ARINC 429 Adapter / Analyzer Software he USB429 interface enables users to leverage existing USB 2.0 - equipped notebook computers or interface to our RSU II touch-screen Ruggedized Service Unit for the ultimate in convenience. But that’s just the beginning; by adding software modules, you can accomplish a variety of other ARINC 429 based analysis tasks, including ARINC 615 Data Loading, TCAS testing, and MCDU Simulation.
ANET429-x - ARINC429 Test & Simulation Modules ARINC429 Test & Simulation Modules with 4, 8 or 16 Software programmable Tx/Rx Channels plus 8 Discrete I/O's. Full Performance on all ARINC429 Channels Concurrently & Programmable for High/Low Speed Bit Rates
Full Error Injection/Detection.
DT400 - ARINC 429 Databus Analyzers The DATATRAC 400 clearly establishes the standard for data bus equipment. Never have so many powerful tools and features been assembled for supporting digital avionics. Data may be read from up to four buses and displayed in every conceivable format, including graphic plots.
DT600 - ARINC 429/629 Databus Analyzers The DATATRAC 600 is a combination ARINC 429/629 data bus analyzer with dual, independent ports for each bus standard. Nearly identical functions are provided for each bus type. These include basic receive and transmit functions along with a general record mode and a powerful breakpoint mode.
BU-67211UX - Multi-I/O 1553/429/717 Advanced Avionics Tester Reliable and easy-to-use, DDC's USB Multi-I/O Test and Simulation Hardware series provides you with the right solution for interfacing to MIL-STD-1553, ARINC 429, ARINC 717, CANbus, Serial I/O, and/or Discrete I/O interfaces.
CoPilot Software - Multi Protocol Databus Test, Simulate & Analyze Ballard's CoPilot is the most advanced databus test, simulation and analysis software on the market today. CoPilot, coupled with one or more of Ballard's hardware products, provides a single solution, simultaneously supporting MIL-STD-1553, ARINC 429, ARINC 664/AFDX and ARINC 708 databuses.
Multi Protocol 4000 Boards The EXC-4000 carrier board series was developed to meet the needs of avionic testers for multi-protocol integrated, digital bus testing. Modules may be selected out of a growing list which currently includes MIL-STD-1553/1760, MMSI, H009, ARINC-429, ARINC-708/453, Serial (232/422/485), Discrete and CAN bus. Additionally, an IRIG B decoder implements a global time stamp relative to the IRIG B pulses.
PC104/T2/R2 - ARINC 429 Interface card The PC104/T2/R2 ARINC 429 Interface card is configured as a 16 bit Stack-through PC/104 interface card and comprises of two independent transmitter channels that act as Bus Traffic Simulators and two independent receiver channels that provide advanced Real Time Monitor and Data Acquisition functions.
429 Series - Databus Analyzers Hand Held The 429 Hand Held Transmitter/Receiver and Data Bus Analyzer provides avionics technicians and line maintenance personnel with an easy method for troubleshooting ARINC 429 labels and has the capability to selectively trap labels three separate ways.
DT200 - CSDB/ARINC Databus Analyzers The DATATRAC 200's advanced features will handle all troubleshooting needs with a unit that conveniently supports two avionics data bus standards, ARINC 429 and CSDB (Commercial Standard Digital Bus). Basic receive and transmit capabilities are extensive. The DT200 has the ability to manage multiple data words, clearly display subfields, and manipulate data with such features as freeze, scroll and clear.
Camelot - Portable Bus Analyzer Excalibur's Camelot is a fully ruggedized laptop computer with built-in MIL-STD-1553 and/or ARINC-429 PCMCIA cards for data bus analysis and recording. Made to operate under the harshest environmental conditions, the Camelot can be used both in flight as well as in the laboratory.
CEI-830 - integrated databus The CEI-830 provides complete, integrated databus functionality for up to 32 channels of ARINC 429, ARINC 575 and selected 2-wire, 32-bit protocols. The CEI-830 supports maximum data throughput on all 32 channels while providing on-board message scheduling, label filtering, multiple buffering options, time-tagging and error detection with support for either 33 MHz or 66 MHz PCI/PMC interfaces. Configurations with support for ARINC 717, ARINC 573, and IRIG-B Receiver (AM or DC/TTL) and Generator (DC/TTL) are optional. Also, BusTools/ARINC, our flexible, Windows-based GUI Bus Analyzer, LabVIEW and LabView Real-Time support is optionally available. The IRIG-B DC level signal can be utilized to synchronize time stamps across multiple boards.
RAR-cPCI - 32 channel RAR-cPC Available in a range of configurations to match your needs, the 32 channel RAR-cPCI provides complete, integrated databus functionality for ARINC 429, ARINC 575 and selected 2-wire 32-bit protocols in the CompactPCI form factor. It supports maximum data throughput on all channels while providing on-board message scheduling, label filtering, multiple buffering options, time-tagging, error detection and avionics-level I/O discretes, with support for either 33 MHz or 66 MHz 32 bit cPCI interfaces. Configurations with support for ARINC 717, ARINC 573 and IRIG-B Receiver (AM or DC/TTL) and Generator (DC/TTL) support are optional. GE Intelligent Platforms' software tools and solutions significantly reduce the time required to integrate various avionics protocols into your application. Included with the RAR-cPCI is our flexible, high-level API (Application Programming Interface)support for Windows XP, 2000, NT, Linux, and Visual Basic. This powerful API supports multiple cards, and is compatible with GE Intelligent Platforms’ API support on PCI, PC/AT and PC/104 platforms. Also, BusTools/ARINC, our flexible Windows-based GUI Bus Analyzer, LabVIEW and LabVIEW Real-Time support is optionally available.
ARINC 429 to PCMCIA Interface w/ 1Tx, 2Rx channels Occupying a single PCMCIA slot in a Notebook PC the card provides 1 Tx and 2 Rx ARINC-429 channels, with Time-Stamping of receive data. Available with ARINC-429 Test and Monitoring Software (ATMOS-429)
T1200B - Control Display Test Equipment The venerable T1200, a mainstay in avionics shops worldwide, has been upgraded to extend its reliability and service life. The display has been replaced by a more reliable, external, touch sensitive color Liquid Crystal Display (LCD). Any system utilizing the ARINC 429 databus can be served with the universal T1200B CDU (Control Display Unit).
CEI-DL - Single-Session Interface Single-Session Interface The streamlined, single-session interface of the CEI-DL data loader software from GE Intelligent Platforms provides intuitive Windows-based ARINC 615-3/603 data loading across a variety of ARINC 429 devices. The single-session software loads one ARINC 615-3/603 compatible LRU at a time, allowing for seamless integration into most traditional aircraft maintenance applications. Since data sets can be retrieved from any location accessible by the host machine (including local and network drives), the data loader eliminates the need for disk-swapping while providing improved configuration management. Multi-Session Interface The multi-session interface of the CEI-DL software is integrated with multiple hardware platforms to provide Windows-based ARINC 615-3/603 data loading of operational programs and database software. Supported on PCI, CompactPCI, PMC, PCI Express, PC/104, PC/AT, PCMCIA and ExpressCard platforms, this flexible application software provides both an easy-to-use portable solution and a robust, multiple-unit, factory or lab station. The CEI-DL data loader solution can be used for development, test, flightline, and maintenance applications. The CEI-DL software includes both the Single and Multi-Session interfaces along with the administration GUI application for specific customer tailoring.
- Analysis (3)
- Analyzers (9)
- Boards (4)
- Bus (10)
- Bus Analyzers (8)
- Cards (5)
- Carriers (2)
- Data Analyzers (2)
- Databus Analyzers (7)
- Discrete Testers (2)
- Generators (2)
- Interfaces (7)
- Lab (2)
- LabVIEW (2)
- Modules (4)
- Receivers (6)
- Simulation Software (3)
- Software (6)
- Transmitters (4)
- Windows (3)
- »See all 51 Categories