AIM

This best seller is a must have for every tune-up kit. Works with most ignition systems: DIS, conventional, electronic and computer controlled systems - domestic and imports. Check timing, diagnose a no-spark condition, check for electronic advance/retard and more. Slim, rotating barrel for better aim at timing mark. ...more

Direct reading advance scale adjusts from 0° to 60°. Advance dial enables user to check base timing, mechanical advance or retard, and electronic advance or retard applications. Slim, rotating barrel for better aim at timing mark. ...more

The #330 is the ideal tool for easy and accurate measurement of RPM in almost any environment. Simply aim the laser beam at a reflective mark placed on a rotating device, push the button and the RPM reading is immediately displayed. No contact with the shaft or wheel is necessary. ...more

For Automotive, Marine, Small Engine, HVAC & Industrial Technicians. The #332 is the ideal tool for easy and accurate measurement of RPM in almost any environment. Simply aim the laser beam at a reflective mark placed on a rotating device, push the button and the RPM reading is immediately displayed. No contact with the shaft or wheel is necessary. ...more

Ideal for characteristic measurement and analysis in the high performance magnetic heads. Adopting the high frequency circuit and the spin stand aim for narrow track, the characteristic of magnetic head (GMR/TMR/Perpendicular) can be measured and analysis by the tester. ...more

Antenna analyzer measures the complex impedance (magnitude and phase) at each frequency of interest in the range of 0.1 to 170 MHz. A PC is used to calculate all RF parameters, including R +/-X, Magnitude and Phase, SWR, Return Loss, TL loss, and more and plot the results in an easy to read graph and interactive Smith Chart. ...more

Our aim is to take the latest technology available to help our customers complete their measurements faster but without loss of precision. With the Nor280 we have again met this objective.This power amplifier is the 4th generation of specially designed units for building acoustic measurements from Norsonic. It is less than half the size and we ...more

The aim of AMIDA-888 DC Characteristic Test System is focus on RF high accuracy test and measurement. It is designed and built by AMIDA Technology and developed primarily to address high volume test requirements at minimal cost. Whatever chip wafer map or final test, AMIDA-888 presents it really cost ownership and high reliable.  ...more

In the testing field, high throughput production and cost effectiveness always are critical concerns for each customer. The aim of LDO test system is designated for that purposes which focus on below 20A, 40V regulator related devices. High accuracy and performance PMU modules offer customer satisfied measurement. ...more

The Monarch PHASAR-TACH combines the accuracy and safety of a non-contact optical Tachometer with the convenience and ease of operation of a pistol grip instrument. Simply aim the Tachometer at a reflective target on the rotating object, squeeze the trigger, and read the RPM. The PHASAR-TACH "R" version has both internal optics and th ...more

Introduction of new features or equipment into a network can create interoperability problems between certain mobiles and the network. In many cases, this is despite both the network equipment and the mobile having passed all of the relevant conformance tests. ...more

Safe, non-contact temperature measurement of terminals, lugs, motors and circuit breakers. Accurate, easy laser targeting makes it quick and easy to aim precisely. Convenient display hold. Reads in either Celsius or Fahrenheit ...more

The VT-V station was designed as a versatile test station with aim to enable measurement of all important parameters of visible imaging systems, particularly for research and development applications. ...more

Instant surface temperature readings, squeeze the trigger and aim using the laser dot. Wide temperature range -40ºC to +420ºC. Distance to spot ratio 8 to 1 three pre-set emissivity settings  ...more

Instant surface temperature readings, squeeze the trigger and aim using the laser dot ...more

Our CATS DVD analyzers are designed for measuring and analyzing the signal of the analog, digital, physical and logical parameters and aspects of a Premastered DVD, with the aim on quality control of the optical disc manufacturing process. With a wide installed base worldwide, CATS DVD is accepted as the reference tester.  ...more

Complete Syntax, Semantics and IEEE 1149.1 compliance check (from 1990 to 2001). BSDL Test Writer generated test bench can be simulated using any of the industry standard simulators (for Eg. Modelsim from Mentor Graphics, VCS from Synopsys). BSDL Test Writer kernel is built using the robust AIM (Add-on Instruction Macro) engine with the PMA (Plug-i ...more

The 4960-0030 Launcher Electronic Unit (LEU) was developed to add more functionality and capability to the existing LAU-129 AMRAAM Launcher currently used on the F-16 aircraft. The LEU identifies and adjusts for the captive missile on-board to provide the necessary signals. The MIL-STD-1760 based LEU support multiple missile including AMRAAM (AIM-1 ...more

The Munitions Capable BRAT (McBRAT) tests smart weapons systems. It initiates Built-In-Test (BIT), provides BIT status, and uploads/downloads and verifies applicable software, including mission planning data resident in the smart weapon. McBRAT is designed for operation in harsh flight line environments.  ...more

Archer AIM+ sets the standard for lithography process control through the > 45-nm node. Based on the mature AIM technology, the system complies with the most advanced processes, meeting ITRS and industry requirements to address all overlay error budget aspects. ...more

JW3206 intelligent handheld power meter is an essential self-developed test instrument which is integrated abroad test instruments advantages and maily aim to high requirements of the users. It features intelligent, multi-functional, fast test and colourful backlight display with large LCD . ...more

This part of ISO/IEC 10373-6 standard deals with test method and equipment which are specific to contactless e-Passport for the purpose of confirming their compliance with international standard. The aim of this standard is to ensure the interoperablity between contactless products: readers and contactless e-Passports. The tool comes with the compl ...more

Agilent continually endeavors to optimize their products so that our customers can work successfully with them. We also aim to keep the products up to the highest standard possible. Therefore, we would like to inform you about our new plans regarding the E2920 series, especially for the PCI-X products E2922A and E2929A.  ...more

The ACE-Core Intellectual Property (IP) is based on the architecture of DDC's powerful Enhanced Mini-ACE MIL-STD-1553 protocol engine. As such, it provides compatibility with all previous and current generations of DDC components, including AIM-HY, AIM-HY'er, ACE, Mini-ACE, as well as Enhanced Mini-ACE, PCI Enhanced Mini-ACE, and Micro-ACE. ...more

The MP300 TPC1 is designed to provide three different protocols for smart cards. In addition to the standard ISO7816-3 communication, two high speed communication protocols are supported : USB (ISO7816-12 compliant), and MMC interface. The parametric test functions aim to obtain a high level of quality control for validating yoursmart cards. ...more