ADSL2

For ADSL / ADSL 2+ installation, maintenance and measurement. This powerful test set provides all test functions you need in the field, such as upstream & downstream rate measurement, error count, DMM, MODEM simulation, PING and Trace testing. By simply plugging the ADSL / ADSL2+ connections into the tester, you will get your result with o ...more

Test set for installing ADSL2+ circuits and IPTV.. Handheld durable design to meet the demands of field service. ADSL1/2/2+ Physical Parameters test. DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Line length) needed to determine if the copper circuits can support the demands of high performance ADSL2+ and IPTV service. MODEM emul ...more

A full-featured test set is the most affordable tester on the market for ADSL2+ and IPTV installations. One-button test with pass/fail results. Highly water resistant to withstand foul weather conditions. Fast Copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Line length) Supports MODEM emulation and simulating Inte ...more

GAO332 ADSL2+ Tester is designed to meet urgent needs for xDSL tests. And xDSL includes ADSL, ADSL2, ADSL2+ and READSL. It is a total solution for xDSL installation & maintenance.With rapid development of xDSL broadband service, installation & maintenance becomes critical. And xDSL service is more complicated than traditional telephone ...more

DMM Testing. Including loop resistance, capacitance, insulation resistance and voltage.Physical Layer Parameter Testing. Including the rate, attenuation, noise margin, output power, etc. The testing data is refreshed automatically.PPPoE Dialing via inner Modem and user information set.Modem mode selection: ADSL2+ auto mode or multi mode.Modifi ...more

GAO2041 ADSL, ADSL2, ADSL2+, RE-ADSL Tester is a much compact and very easy-to-use handheld test instrument. It can support various ADSL line standards, specially for installation, maintenance and measurement. The operator all needs to do is to write the configuration, set the measurement margin and parameters, then, complete the functions of ...more

GAO 2045 ADSL2+ is a new model handheld telecommunication test set that used for the installation, maintenance and measurement of ADSL2+ service. It supports the testing function such as parameter, error, DMM, PING/TRACE that related to ADSL2+ service, user register authentication and simulation MODEM on the ADSL2+ user?s line side. ...more

GAO330 is designed to handle all kinds of xDSL lines including ADSL, ADSL2, ADSL2+, READSL. It not only can test xDSL physical layer parameters but also can help you to confirm whether your line is able to support xDSL service.This tester additionally evaluates your line quality. Other features include PPPoE dialing, IE network page browsing, ...more

The GAO-701C ADSL2+ Tester is a hand-held communication instrument that supports batteries as power supply, and has a large screen with Chinese display. This product is particularly applicable for the field cutover, acceptance and maintenance of ADSL equipment, and can be widely used by ADSL business operators like China Telecom, China Rail Co ...more

EXFOs CoLT-450P DSL Triple-Play Test Set represents the next generation of the popular CoLT-450, a powerful handheld platform optimized for triple-play testing over DSL. Whether you are testing ADSL, ADSL2+, G.shdsl, including IPTV, VoIP and ISP services, the CoLT-450P has the power and modularity that you require in the field.  ...more

The CoLT-250+ is a fast, reliable test set for verifying that ADSL2+, ADSL2, RE-ADSL and ADSL services can be properly delivered from the central office to the subscriber.  ...more

Ideal for ADSL2+ link installation and maintenance, the EXD-350 Advanced ADSL2+ Tester allows technicians to test copper loop quality, verify ADSL2+ performance and validate Internet connectivity. ...more

Simple, affordable triple-play testing over ADSL1/2/2+ and Ethernet 10/100. ADSL1/2/2+ service testing at the customer premises, a remote location or the central office. IPTV service assurance using a comprehensive range of QoS metrics Unparalleled ease of use for VoIP QoS assurance. IP layer testing: connectivity consistency assessment using ...more

The complete test tool for xDSL technology. Based on fully flexible architecture, this is a compact, robust and simple to use unit that adopts a 'layered approach' to DSL service testing. It provides analogue line testing, DSL, ATM, IP , PPP and application layer testing. Simple 'One Button' automatic modes and an advanced 'Manual' mode. ...more

FEATURES: Simulates 0.4 mm PE and 0.5 mm PE; Bandwidth DC to 18 MHz; Ideal for testing ADSL, ADSL2, ADSL2+, ADSL2++, VDSL, VDSL2(Profile 17a) Modems; 0.4 mm PE: Loop lengths programmable from 0 to 8,000 m in 50-m increments; 0.5 mm PE: Loop lengths programmable from 0 to 8,000 m in 50-m increments; Noise Floor less than –150 dBm/Hz; Plugs into our ...more

The demand for Digital Subscriber Line (DSL) broadband services continues to explode around the globe. The NTS/Phase Seven NAIL is an authorized ITL for TR-67 ADSL modem testing and certification against a wide range of DSLAMs (DSL Access Multiplexers). The NAIL will also test and certify ADSL2 and ADSL2+ modems once testing standards are comp ...more

FEATURES: Simulates 26 AWG PIC as specified in ANSI T1.417; Bandwidth DC to 18 MHz; Ideal for testing ADSL, ADSL2, ADSL2+, ADSL2++, VDSL, VDSL2(Profile 17a) modems/DSLAMs; 8 channels per line module; Loop lengths programmable from 0 to 15,000 ft in 1,000-ft increments; Plugs into our 458-CC (16-slot chassis) or 458-2SL (2-slot chassis); One-Year Wa ...more

The most cost-effective solution for easy while productive service qualification and troubleshooting of ADSL, ADSL2, ADSL2+ and RE-ADSL2. Trend's MC2+ enables you to quickly check what is going on with your ADSL line, with minimum or no configuration at all. ...more

FEATURES: Simulates 26 AWG PIC and 24 AWG PIC as specified in ANSI T1.417; Bandwidth DC to 36 MHz; Ideal for testing ADSL, ADSL2, ADSL2+, VDSL, VDSL2 modems/DSLAMs; 26 AWG: Loop lengths programmable from 0 to 3,150 ft in 50-ft increments; 24 AWG: Loop lengths programmable from 0 to 3,150 ft in 50-ft increments; Plugs into our 458-CC (16-slot chassi ...more

FEATURES: Bandwidth DC to 4.5 MHz; Meets ITU-T G.992.5 standard; 8 channels per line module; Channel 1: loop lengths programmable from 0 to 9,450 m in 150-m increments; Channel 2 – 8: loop lengths programmable from 0 to 9,000 m in 600-m increments; Ideal for testing DSL Modems and DSLAMs; Simulates 0.4 mm PE; Channel-to-channel isolation up to 90dB ...more

Features: Simulates 0.4 mm PE and 0.5 mm PE as specified in ETSI TS 101 388; Bandwidth DC to 36 MHz; Ideal for testing ADSL, ADSL2+, VDSL2 modems/DSLAMs; 0.4 mm PE: Loop lengths programmable from 0 to 1,575 m in 25-m increments; 0.5 mm PE: Loop lengths programmable from 0 to 1,575 m in 25-m increments; Plugs into our 458 Series (16-Slot) or 458-3SL ...more

FEATURES: Bandwidth to 4.0 MHz; 8 channels per line module; Loop lengths programmable from 0 km to 7.5 km, in 500-m increments; Simulates 0.4 mm Paper as specified in G.996.1; Plugs into our 458-CC (16-slot chassis) or 458-2SL (2-slot chassis); One-Year Warranty/Calibration. The Model 458-LM-HDJ ADSL2++ Local Loop Simulator Line Module for Japan ac ...more

Features: Simulates 26 AWG PIC as specified in ANSI T1.417; Bandwidth DC to 36 MHz; Ideal for testing ADSL, ADSL2, ADSL2+, VDSL, VDSL2 modems/DSLAMs; 8 channels per line module; Loop lengths programmable from 0 to 7,500 ft in 500-ft increments; Noise Floor less than –150 dBm/Hz; Line Module plugs into our 458-3SL and 458 chassis. Plugs into our ...more

FEATURES: Simulates 24 AWG and 26 AWG per T1.417 Bandwidth DC to 18 MHz; Ideal for testing ADSL, ADSL2, ADSL2+, ADSL2++, VDSL, VDSL2(Profile 17a) Modems; 24 AWG: Loop lengths programmable from 0 to 16,000 ft in 100-ft increments; 26 AWG: Loop lengths programmable from 0 to 16,000 ft in 100-ft increments; Plugs into our 458-CC (16-slot chassis) or ...more

FEATURES: Simulates 26 AWG PIC and 24 AWG PIC as specified in ANSI T1.417; Bandwidth DC to 36 MHz; Ideal for testing ADSL, ADSL2, ADSL2+, VDSL, VDSL2 modems/DSLAMs; 26 AWG: Loop lengths programmable from 0 to 3,150 ft in 50-ft increments; 24 AWG: Loop lengths programmable from 0 to 3,150 ft in 50-ft increments. Introducing the world’s first 36-MHz ...more