ADSL

The 965DSP/ADSL and 965DSP/SA/ADSL subscriber loop analyzers feature an Alcatel MTK-20150 modem chipset in the proven 965DSP platform. The 965DSP/ADSL tester provides active ADSL testing to address the growing number of residential and business ADSL customers. It delivers all the multi-function capabilities of the 965DSP tester plus the testin ...more

Wilcom?s PS-4401 1RU-96 Port Shelf is the industries highest density ADSL2+ POTS splitter in a one rack-unit design. This 96 port 1 RU design along with Wilcom?s proven performance makes it the perfect Central Office splitter. The high-density, temperature hardened splitter also has the addition of common mode protection creating the perfect s ...more

The Wilcom PS-21 ISDN POTS Splitter is a full ETSI combined ISDN/POTS ADSL Splitter designed to provide ISDN service in concert with ADSL technology. The device blocks high frequency (20kHz-1MHz) energy from interfering with ISDN/POTS equipment. The PS-21 employs a low-pass filter for standard voice-grade lines.  ...more

MOTECH MT320 Aeasy,the ADSL 2+Tester, is the all-in-one & hand-held solution for worldwide internet service providers. With the multi-function & automated fault diagnostics,MT320 can ensure that installers can guarantee the quality of their service.Complied with all the necessary international regulations,MT320 is the cost-saving choi ...more

The Tech-X line of intelligent handheld field test units includes ADSL 2/2+, ATM, IP, and copper feature sets that allows service providers to install and troubleshoot next generation broadband services while increasing service efficiency with automated and integrated fault diagnosis. The Tech-X field tester employs Spirent Communications' automate ...more

This PS-4101 1U Shelf is 1.75" tall and design to be equipped with up to two (2) ADSL2+ Splitter cards for a total of 48 ports. The shelf can be mounted in 19 or 23 inch racks by using the unique designed rack adapters. The wide spectrum of operation makes this shelf ideal for ADSL2+ deployment. ...more

The Wilcom PS-11-I2 POTS Splitter is a passive low-pass filter designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz - >1MHz) energy from interfering with POTS equipment. The PS-11-I2 employs a low-pass filter for standard voice-grade lines.  ...more

The Wilcom PS-55 MDx 24 Port Wall Mount POTS Splitter is a passive low-pass filter designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz-1MHz) energy from interfering with POTS equipment. The PS-55 MDx employs a low-pass filter for standard voice-grade lines. ...more

Automatic Loop Qualification. xDSL Testing Features (End to End). Wideband Measurements. Metallic Testing Features. Infrared Isolated Serial Interface ...more

The Wilcom PS-15 Wall-mount POTS Splitter is a passive lowpass filter designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz- 1MHz) energy from interfering with POTS equipment. The PS-15-I3S employs a low-pass filter for standard voicegrade lines ...more

This PS-4103 3U Shelf is 3 EIA rack units tall (5.25") and design to be equipped with up to six (6) ADSL2+ Splitter cards for a total of 144 ports. It is one of the industries highest density shelves with the smallest foot-print for mounting into 19 inch racks. The shelf can be mounted in 19 or 23 inch racks by using the unique designed ra ...more

The PS-11 Ring Trip Mitigator is a passive low-pass filter designed to provide POTS service in concert with ADSL2+ technology. The device blocks high frequency energy from interfering with POTS equipment. The PS-11-RTM (Ring Trip Mitigator) employs a low-pass filter for standard voice-grade lines.  ...more

The Wilcom PS-20 ETSI POTS Splitter is designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz-1MHz) energy from interfering with POTS equipment. The PS-20 employs a low-pass filter for standard voice-grade lines ...more

MT300 Aeasy is a handheld tester for POTs and ADSL lines. It is a fully integrated ATU-R modern emulator for ADSL line installation, qualification and maintenance. MT300 also represents a digital multimeter for troubleshooting the basic cooper loop. Apparently, daily based telecommunication technicians focus on these two test functions as t ...more

ADSL bridge/router provides the user with astonishing Internet access speed. ATU-R210 will deliver all the Web and multimedia information through regular copper telephone line. It is an ideal solution for small businesses and home offices that are looking for a cost-effective, high-speed access, higher security, and easy to setup equipment ...more

The CoLT-250+ is a fast, reliable test set for verifying that ADSL2+, ADSL2, RE-ADSL and ADSL services can be properly delivered from the central office to the subscriber.  ...more

Simple, affordable triple-play testing over ADSL1/2/2+ and Ethernet 10/100. ADSL1/2/2+ service testing at the customer premises, a remote location or the central office. IPTV service assurance using a comprehensive range of QoS metrics Unparalleled ease of use for VoIP QoS assurance. IP layer testing: connectivity consistency assessment using ...more

The ALS-10-EU/I is a low-cost, compact, designed to implement the functionality of low pass filter in ISDN-BA with 2B1Q or 4B3T baseband linecodes over ADSL application. It integrates low pass filters that block the high frequency energy from reaching the ISDN-BA device and provide isolation from impedance effects of the ISDN-BA device on ADSL ...more

Ideal for ADSL2+ link installation and maintenance, the EXD-350 Advanced ADSL2+ Tester allows technicians to test copper loop quality, verify ADSL2+ performance and validate Internet connectivity. ...more

EXFOs CoLT-450P DSL Triple-Play Test Set represents the next generation of the popular CoLT-450, a powerful handheld platform optimized for triple-play testing over DSL. Whether you are testing ADSL, ADSL2+, G.shdsl, including IPTV, VoIP and ISP services, the CoLT-450P has the power and modularity that you require in the field.  ...more

The DSL Phantom™, TraceSpan's unique passive ADSL tapping device, monitors and records data transparently within the ADSL physical layer. IP layer traffic can be stored or sent over a secure network to the Law Enforcement Authority (LEA) monitoring facility. DSL Phantom™ can be used either as an independent unit, or as part of a comprehensive LI mo ...more

The ALS-R100 is a rack mount solution for central office or service providers, which nests up to 3 cards containing ADSL line splitters. Depends on the modules, the chassis can be adjusted for the combination. It comes to the maximum 96 loops. It provides low-pass filters designed to provide POTS (Plain Old Telephone System) service to a line ...more

The new standards ADSL 2 and ADSL 2+ provide greater reach and higher data rates. The two technologies were developed side by side, and are downwardly compatible with the existing G.992.1 ADSL standard. ADSL 2+ (G.992.5) brings ADSL access to users who until now were located too far from the operator's central office. The increased reach is po ...more

TraceSpan's TestHead solution is multi-tier equipment designed for use by all the technical levels at the service provider. The TestHead can produce reports that range from a simple pass/fail for the field technician to a detailed signal level report of an initialization sequence that may be useful to the equipment vendor engineer. The reports and ...more

The DSL Xpert™ multi-layer analyzer (patent pending) breaks new ground as the only non-intrusive performance analysis solution for ADSL2Plus, ADSL2 and ADSL products. DSL Xpert™ is a modular tool designed for R&D and laboratory engineers engaged in the deployment of ADSL2Plus, ADSL2 and ADSL standard-compliant solutions. Cutting significant time fr ...more