Search Results for AC/DC Power Supplies / Current

  • AC-DC High Voltage Power Supplies These modular High Voltage supplies may be used as constant voltage or constant current sources. They may be remotely programmed by means of either voltage or resistance, and have provisions for remote monitoring and output inhibiting. All control and monitoring connections are on a pluggable terminal block that functions as a connector, providing wiring convenience and permitting easy and rapid connect/disconnect. Outputs are arc/short circuit protected.
    Acopian Technical
  • 1U Half Rack 750W AC / DC Programmable Power Supplies The Genesys family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Now available in half rack configuration at 750W, designated GENH, and with available output voltages from 7.5 to 600V, and current up to 100A. Active PFC, and universal input head a long list of standard features. Together with the Full Rack Models at 750W and 1500W, and the new 2U 3.3kW, they provide the perfect basis for flexible Test and Measurement System design.In addition to highest power density, for the first time a universal input is available in this size and power. The wide range input is not just dual range, but continuously variable from 85-265VAC, single phase, 50/60Hz. It also features Active Power Factor Correction of 0.99 at full load, another first in this size and density. This assures operation in difficult AC environments and meets European EMC requirements.Other significant safety features include Safe Start and Last Setting Memory.
    TDK-Lambda Americas
  • AC/DC Hall Effect Current Sensors General Purpose Inverters. AC/DC Variable Speed Drivers. Battery Supplied Applications. Uninterruptible Power Supplies (UPS). Switched Mode Power Supplies (SMPS)
    ChenYang Technologies
  • 1U - Switching Power Supplies The 1U family of programmable AC-DC power supplies sets a new standard for flexible and reliable power for your application. Available in a Rack Mounting or Benchtop at 720W power levels with single output voltages ranging from 3.3 to 135V and current capabilities up to 70A.
    Acopian Technical
  • 1260-22 - High Power Switch Card The Model 1260-22 is a 40-channel, SPST, high-power switch module designed for switching and routing high-current sources such as AC and DC power supplies in automated test systems. The 1260-22 switches currents up to 20A, AC or DC, and voltages up to 250VDC or 250VAC. Maximum power handling is 600WDC or 4800VA per channel
    Astronics Test Systems
  • 1260-20 - Power Switch Module Model 1260-20 is designed for high-current switching of AC line power, DC power supplies and AC or DC current sources. Power switch networks may be configured from twenty independent DPST switches. Up to 8A at 250 VACrms or 5A at 48 VDC may be switched through each two-wire channel. 
    Astronics Test Systems
  • 1260-121A/B - Power Switch Plug-In Module The Model 1260-121A/B is a 12-channel SPDT switching card for use in either the 1260-100 VXIbus Carrier or the 1256 GPIB/RS-232 Switching Mainframe. Each channel of the 1260-121A/B switches up to 13 AAC, making it the ideal solution for applications requiring high-current switching of AC and DC power supplies, as well as current sources. 
    Astronics Test Systems
  • 1260-16A - High Density, 6A Power Switch Card The Racal Instruments 1260-16A is a 64-channel, SPDT, high isolation; low crosstalk switch module designed for switching and routing sources such as AC and DC power supplies in automated test systems. The 1260-16A switches currents up to 6A, AC or DC, and voltages up to 110VDC or 250VAC. 
    Astronics Test Systems
  • 1260-21 - High Current, Low Path Resistance Power Switch Card The Model 1260-21 is a 12-channel, SPDT, high-current switch module. It was designed for switching and routing high current, high power sources such as AC and DC power supplies in automated test systems. The 1260-21 switches currents up to 10A, AC or DC, and voltages up to 32VDC or 130VAC. 
    Astronics Test Systems
  • 1260-23 - High Current, Low Path Resistance Power Switch Card Racal Instruments 1260-23 is a 1-channel, SPDT, 2 Channels DPDT, and 5 Channels SP4T, high-current switch module. It was designed for switching and routing high current, high power sources such as AC and DC power supplies in automated test systems. The 1260-23 switches currents up to 25A, AC or DC, and voltages up to 32VDC or 130VAC. 
    Astronics Test Systems
  • 1510 - Discharge Tube Power Supply AC and DC high voltage and high current outputs
    Built in voltmeter and ampmeter
    Voltmeter selectable between the 80V and 500V supplies
    B&K Precision
  • 1511 - Digital Discharge Tube Power Supply New digital LED meters, improving the resolution of the readings to 1%. Four separate power supplies, all insulated from each other and grounded: high voltage, bias voltage, filament supply, and Helmholtz coil supply. AC/DC, high voltage, and high current for versatility. Voltmeter selectable between 80V and 500V supplies. Electronic overload protection. Banana jack connectors
    B&K Precision
  • 600A - kW, up to 600A: Programmable Power Supply The Genesys™ family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Now available in more power levels (750W, 1.5kW, 3.3kW, 5kW, 10kW and 15kW) and with available output voltages from 7.5 to 600V, and current up to 1,000A. Active PFC, and universal input head a long list of standard features.
    TDK-Lambda Americas
  • 63600 Series - Modular DC Electronic Load Chroma's 63600 Series DC Electronic Loads are designed for testing multi-output AC/DC power supplies, DC/DC converters, chargers, batteries, adapters, and power electronic components. Excellent for research, development, production, and incoming inspection applications. The 63600's state of the art design uses DSP technology to simulate non-linear loads using an unique CZ operation mode allowing realistic loading behavior. The 63600 series can draw its full rated current to almost zero volts. This unique feature guarantees the best loading performance for fuel cells and modern Point-of-Load devices.
    Chroma Systems Solutions
  • EX1200-2002 - 12 Channel 16 Amp Form C (SPDT) Switch Large switching capacity in a small footprint Switch up to 16 A current - highest in its class High breakdown voltage (1,000 V rms between open contacts) Ideal for switching AC or DC power supplies and current sources Fail-safe interrupt inputs that can detect a fault condition automatically open up relays to their default state
    VTI Instruments
  • EX1200-2001 - 20 Channel 16 Amp Form A (SPST) Switch Large switching capacity in a small footprint Switch up to 16 A current - highest in its class High breakdown voltage (1,000 V RMS between open contacts) Ideal for switching AC or DC power supplies and current sources Fail-safe interrupt inputs that can detect a fault condition automatically open up relays to their default state
    VTI Instruments
  • 750W and 1.5kW, up to 200A: Programmable Power Supply The Genesys™ family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Now available in more power levels (750W, 1.5kW, 3.3kW, 5kW, 10kW and 15kW) and with output voltages from 7.5 to 600V, and current up to 1,000A. Active PFC, and universal input head a long list of standard features. In addition to highest power density, for the first time a universal input is available in this size and power. The wide range input is not just dual range, but continuously variable from 85-265VAC, single phase, 50/60Hz. It also features Active Power Factor Correction of 0.99 at full load, another first in this size and density. This assures operation in difficult AC environments and meets European EMC requirements.
    TDK-Lambda Americas

Results 1 - 17 of 17