AC Sources

The Model 3210C is a 100A AC Source/Calibrator and is an accurate voltage to current amplifier or transconductance amplifier. The current output is directly proportional to the input voltages from a high accuracy ac voltage standard. The AC voltage bandwidth is 40Hz to 500Hz. The 3210C is calibrated with instruments and load resistors traceabl ...more

The Fluke 5520A Multi-Product Calibrator sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current to simulate dc and ac power with phase control, resistance, capacitance, thermocouples and RTDs. ...more

The 5700A and 5720A are five-function calibrators designed to address the most demanding electrical calibration workload. They source direct and alternating voltage and current and resistance. A wideband voltage option extends overall ac bandwidth to 10 Hz to 30 MHz to cover RF voltmeters. Both are compatible with the 5725A, and 5205A/5215A am ...more

The 9100 is a multifunction calibrator with a breadth and depth of outputs never before available from a single calibration source. In addition to DC and AC voltage to 1050V, variable resistance to 400MO and DC and AC current to 20A (1000A via the optional current coils), the 9100 delivers continuously variable capacitance values to 40 mF and ...more

The Signal Forge 1800M Frequency Expansion Module is a frequency multiplier source that add-on to the Signal Forge 1000 Signal Generator. It provides an RF (AC-coupled) output in the frequency band of 1.0 GHz to 1.8 GHz. FEATURES: RF output: 1.0 GHz to 1.8 GHz. Output power range of ?11 dBm to +7 dBm. 1 Hz resolution. Low close-in phase noise. ...more

The Signal Forge 2500M Frequency Expansion Module is a frequency multiplier source that add-on to the Signal Forge 1000 Signal Generator. It provides an RF (AC-coupled) output in the frequency band of 1.5 GHz to 2.6 GHz. FEATURES RF output: 1.5 GHz to 2.6 GHz. Output power range of ?11 dBm to +7 dBm. 1 Hz resolution. Low close-in phase noise. ...more

The PWS1000 Series of power supplies provides 12, 24, or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source. Analytic Systems' power supplies use Switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. Circuit innovations reduce output ripple to levels previou ...more

Compact certifying tool with wide 70dBm range. Fiber certification with high accuracy and high resolution for multimode and single mode applications. Wide 70dB dynamic range of +5dBm to -65dBm with ±0.15dB accuracy ...more

Source and measure 8 thermocouple type devices J, K, T, E, C, R, S, and N. One model for multiple thermocouple types with precision output displayed as mV or °C/°F. Microprocessor assures maximum accuracy to 0.15% of reading over wide ranges. High Accuracy Calibration function simulates precision thermocouple outputs for use in calibrating the ...more

Non-contact AC voltage detector and LED flashlight combined in one convenient, compact design. With exclusive dual-sensitivity. The voltage detector glows blue when it's near AC voltage, and glows red when it's at the source. Detects voltages from 40 V AC to 300 V AC. ...more

To meet the high accuracy and low price requirements for LCM TV test device, Chroma 27012 that integrates the signal and power source provide a complete test solution for LCD Module. Its LVDS / TTL(Option) signal source fully complies with the digital signal standard, meanwhile with the 24V/12V/5V/3.3V DC source output it is able to supply pow ...more

The NSI-RF-PNA20-003-40 is a high performance 40 GHz antenna measurement system based on the 20 GHz Agilent PNA Vector Network Analyzer, the NSI-RF-5943 Distributed Frequency Converter and the NSI-RF-5928 Frequency Doubler. PNA option H11 is used to access the internal PNA LO source, uses an input IF of 8.33 MHz (compatible with NSI DFC) and a ...more

The Model 522 is a microprocessor controlled DC Voltage Calibrator and is a highly versatile reference source designed to meet the needs of today's demanding requirements for accuracy and stability. ...more

Sophisticated and compact design ?As small as 2U (8.9cm) size for capacity of 1KVA. Unique regulation function in providing capability to turn on high inrush current loads such as motors and compressors. High Crest Factor, capable to withstand inrush current > 4 times of rated current and protect against false judgement on high inrush curren ...more

The Model 282CPS Charge Plate System is an accessory for the Model 282 Fieldmeter that permits the Model 282 to measure ionizer performance. The 282CPS includes a charge plate attachment for the fieldmeter and a charging source to charge the plate attachment. The fieldmeter then measures the plate voltage during balance and decay tests. ...more

The DTO/Synthesizer module is a compact, broadband frequency source, covering the frequency range of 2.0 to 18 GHz. In DTO mode, the unit exhibits frequency settling times below 1µS, while in synthesizer mode, frequency accuracy and stability exceeding 1.5PPM is achieved. ...more

Using a patented maximum & minimum search technique, this DOP meter measures and displays the Degree of Polarization (DOP) of a light source in real time, with high accuracy and wide dynamic range. ...more

A clip on fiber identifier used to identify traffic, or a test tone generated by a source, or as a route tracer. Easy to use with one hand. Active display of traffic or tone direction  ...more

The 4000 Series Hand-Held Gaussmeters are easy to use and ideal for commercial or home use. They accurately measures extremely low frequency magnetic fields generated by electrical equipment. Applications include detecting magnetic field emissions from a wide variety of sources including video display terminals (VDTs), AC power lines, office e ...more

Incorporate with Industrial PC (IPC); dust proof, vibration resistance,low distortion, high stability, and suitable for any working environment. Built-in 1KVA Programmable AC Power Source, or option of any higher ...more

The E8257DS10 millimeter wave source module is one of a series of OML, Inc. (AG series) millimeter source modules that have been designed to work directly with the E8257C/D (with Option 1EA) providing high power, millimeter test signals for waveguide bands from 75 to 110 GHz. The E8257DS10 also provides the high frequency accuracy and frequenc ...more

The CR6200 Series, Power Transducers and Transmitters are designed to provide a controlled output that is proportional to the average being drawn from a power source. These devices are specifically targeted to provide an efficient solution to most power sensing needs. ...more

The 7740 Synthesizer module is a compact, broadband frequency source, covering the frequency range of 0.5 to 18GHz. The module exhibits frequency accuracy and stability exceeding 1.5PPM. ...more

The IQS-2400 WDM Laser Source offers high accuracy and stability for testing the power and spectral sensitivity of active components, passive components and WDM building blocks. ...more

Materials Testing 16S is a UV light source used to conduct an accelerated UV test. The 16S Solar Simulator accurately simulates the suns UV spectrum and provides the capability to see how materials will react to years worth of UV exposure in only a few days. ...more