19 Racks

Kontron offers a complete line of off-the-shelf rackmount system solutions with highly configurable and classic industrial rack chassis ranging from 1U to 6U standard 19-inch form factors which utilize a rich set of the latest computing engines - from low-power to dual processor. ...more

Two PCM receiver decode and display the A and B signaling bits of all 24 channels simultaneously in both directions. Decodes D1D, D2, D3/D4. Allows for terminated or bridged readings. Indicators for span line alarms, B8ZS, All 1s, BPVs and frame errors. Bantam jacks. Power is -48 VDC with 115 VAC and -24 VDC options. Single rack space, 19/23&q ...more

The Model V768 Termination Panel provides a convenient field termination method for module 1/0 signals. Arranged for 19-inch relay rack mounting, the panel permits termination of 32 I/O channels. It is 2U high and therefore occupies only 8.9 centimeters (31/2 'inches) of rack height. ...more

Simultaneous send and receive instrument checks level from -40 to +15 dBm and frequency from 100 to 25,000 Hz. Filters used are C Message, 3 kHz, 15 kHz and 1010 notch. Preset and variable settings. Terminates at 135, 600 and 900 ohms. Monitor speaker. Talk/dial/hold capable. 310 jacks. Bell Pub 41009. Power is -48 VDC with 115 VAC, -24 VDC op ...more

The 4033A is a one-input, fifteen-output pulse distribution amplifier in a 1U,19-inch rack mount chassis. It provides fifteen isolated outputs from a single input. An Ethernet port on the rear panel provides the capability to remotely monitor the status of the input and all output signals. Any failure in the unit will immediately provide an ala ...more

The Model 1992 Isothermal Panel provides a referance junction for up to 31 thermocouples. When configured for non-isothermal operation, the panel permits termination of up to 72 I/O signals. Arranged for 19" rack mounting, the panel occupies one 4.45 cm (1.75 in) of rack space. ...more

The Model 941 is a Multi-Channel Data Quality Monitor (DQM) system packaged in a 10.5" x 19" EIA rack mountable chassis. The system supports eight PCM data streams. The unit provides information pertaining to the data stream quality as well as frame and subframe synchronization states. ...more

Decodes T-1 and provides access to any of the 24 channels with VF and signaling outputs (310 jacks). Counts BPVs or frame errors. Indicates frame loss, remote alarm or no PCM. Shows A and B bit signaling status. D1d, D2, D3/D4 compatible. Monitor speaker. Bantam jack input. Power is -48 VDC with 115 VAC and -24 VDC options. Single rack space. ...more

The Model 1850 Termination Panel provides a convenient field termination method for module I/O signals. It is arranged for 19-inch relay rack mounting and requires only 4.45 cm (1 3/4-inch) of rack height. The 1850 is a rigid extruded aluminum channel containing 52 termination blocks which feature a screw clamp retention for the wires. The terminat ...more

This PS-4103 3U Shelf is 3 EIA rack units tall (5.25") and design to be equipped with up to six (6) ADSL2+ Splitter cards for a total of 144 ports. It is one of the industries highest density shelves with the smallest foot-print for mounting into 19 inch racks. The shelf can be mounted in 19 or 23 inch racks by using the unique designed ra ...more

The Model 1858 Termination Panel provides a convenient method for field terminating module I/O signals. Arranged for 19-inch relay rack mounting, the panel permits termination of 32 I/O channels. It is 2U high and therefore occupies only 8.9 cm (3 1/2 inches) of rack height. The field wiring connection layout is the same as the 1856 panel. ...more

Rack-mount assembly, holds TBX terminal blocks in standard 19 in. rack-enclosures ...more

This version of Harness Tester is presented inside a 19 inches rack and can integrate up to 16 switching boards (500 V DC / 350 V AC for hipot & insulation, or 2000 V DC / 1500 V AC for hipot & insulation ...more

Compact FieldPoint Mounting Hardware - 19 in. rack-mounting bracket ...more

This version of Harness Tester is presented inside a 19 inches cabinet and can integrate up to 5 racks of 16 switching boards (500 V DC / 350 V AC for hipot & insulation or 2000 V DC / 1500 V AC for hipot. ...more

The 5B Rack-Mount Kit mounts a 5B Backplane and power supply into standard 19 inch rack-mount cabinets. ...more

Rack-mount kits hold signal conditioning accessories, such as the AMUX-64T analog multiplexer and SC Series signal conditioning boards, in standard 19 in. rack-mount cabinets. The rack-mount kits are available with either an acrylic plastic or metal wraparound cover. ...more

With SCXI rack mount kits, you can install your SCXI-1000, SCXI-1001, SCXI-1000DC, PXI-1010, or PXI-1011 chassis into standard 19-inch instrument chassis. ...more

Xray fluorescence spectrometry (XRF) is a nondestructive method for the elemental analysis of solids and liquids. ...more

The 4037A is a one-input, sixteen-output L1/L2-Band amplifier in a 1U, 19 inch rack mount chassis. It provides sixteen isolated (> 15 dB) outputs from a single input. This unit is ideal for distributing GPS antenna signals. The front panel provides green LED status for the power and antenna bias voltage setting.  ...more

The V765 Termination Panel provides a convenient method for terminating module I/O signals. Arranged for 19-inch rack mounting, the panel permits termination of up to 72 I/O terminations and occupies only 1U of rack height (4.45 cm, 1.75 in). ...more

This PS-4101 1U Shelf is 1.75" tall and design to be equipped with up to two (2) ADSL2+ Splitter cards for a total of 48 ports. The shelf can be mounted in 19 or 23 inch racks by using the unique designed rack adapters. The wide spectrum of operation makes this shelf ideal for ADSL2+ deployment. ...more

The V792 Isothermal Panel provides a reference junction for up to 31 thermocouples. When configured for non-isothermal operation, the panel permits termination of up to 72 I/O points. Arranged for 19-inch rack mounting, the panel occupies only 1U of rack height (4.45 cm, 1.75 in). ...more

The Model 1854 Termination Panel provides a convenient method for field terminating module I/O signals. Arranged for 19-inch relay rack mounting, the panel permits termination of 32 channels of I/O and occupies only 4.45 cm (13/4 inches) of rack height. The 32 channels are broken into two groups of 16 channels each for mating with modules such as t ...more

Eagle is a new data acquisition system designed to provide a world-class rack-mounted solution for medium channel-count dynamic data recording, and real-time monitoring requirements. Eagle is particularly suited to applications close to the test article with a rugged 19" rack-mount chassis. ...more