Model 227 - RS-232 High Speed Line Driver with LCD Display
FEATURES: DataSpy Status Display; Full Duplex to 5 Miles; Async, DC to 115.2 KBPS; Powered by TD; RJ-11 and Screw Terminals for the Line Interface; Built-in Surge Protection; Fully Compatible with Model 201 up to 19.2 K. The Model 227 RS-232 High Speed Line Driver with LCD Display provides full-duplex transmission from DC to 115.2 KBPS over two twisted pairs. The Model 227 includes Telebyte's unique DataSpy LCD display, which provides the user with important status information regarding the operation of the device. Because the LCD operates from less than one milliwatt of power, it has no affect on the operation of the Model 227. The LCD is extremely useful during installation and checkout or whenever a problem is suspected. The graphic display presents the user with a live status of the transmit and receive data signals (TD and RD) and control signals (CTS, RTS, DSR, DCD and DTR). The Model 227 does not require any power source as it steals its power from the Transmit Data signal applied to the RS-232 connector. The data I/O occurs on Pins 2 and 3 of the RS-232 connector.
The DTE/DCE switch allows reversing of the connections to Pins 2 and 3 depending on whether the unit to which the modem is connected is wired as a DTE or DCE device. Data transmission between modems utilizes differential baseband signaling techniques. Common mode signal rejection capability is greater than 20 volts. These features provide for error-free operation in noisy environments. The Model 227 is offered with a male or female RS-232 connector. The four-wire line interface is a five-position terminal block and an RJ-11 modular phone connector. The four-wire line includes built-in surge protection which uses Pin 1 (Frame Ground) as the path for suppressing surges.
|
Telebyte, Inc.
355 Marcus Blvd.
|
| Related Products |
-
4894B Enhanced GPIB to Serial Interface ICS Electronics Contact Info Send To Colleague 
An enhanced bidirectional IEEE-488.2/GPIB to serial interface that can be used to adapt devices with RS-232 and RS-485 (RS-422) serial interfaces to the GPIB Bus. A 256 Kbyte RAM buffers up to 252,000 characters and frees the computer for other tasks while the 4894B transparently transfers data to or from the serial device when in the G mode. ...more -
4803 GPIB to Parallel Digital Interface Board ICS Electronics Contact Info Send To Colleague 
A IEEE-488.2 GPIB to digital interface with 40 I/O lines that can be used to easily adapt devices with digital signals to the IEEE-488/GPIB/HP-IP bus. Signal monitor feature allows the 4803 to detect signal changes on 15 inputs. High-current drivers and input pullup resistors. Drives more devices, longer lines and inputs CMOS signals or switch ...more -
VXI-5539A - 4 or 8 Serial Interface Module ICS Electronics Contact Info Send To Colleague 
A C-size VXI module that provides programmable four or eight RS-232, RS-422 and RS-485 serial interfaces in a single VXI slot. Data transmission andreception can be done with word serial messages ortransparently by passing data through VXI Fast DataChannel buffers. Multiprotocol capability - ASYNC mode standard, HDLC, SDLC, and other bit orien ...more -
4867 - GPIB Data Acquisition & Control Interface ICS Electronics Contact Info Send To Colleague 
The Model 4867 GPIB Data Acquisition and Control Module provides analog and digital signals for controlling virtually any kind of a device and the capability to read back analog voltages, digital signals andtemperatures. ...more -
DX/256x256 - Digital Data Switching Systems Cytec Corp. Contact Info Send To Colleague 
CYTEC's DX/256x256 Series of Digital Data Switching Systems are solid state switch matrices available in nonblocking, full fan-out configurations from 64x64 to 256x256. A variety of different Input/Output Modules allow for a variety of single ended or differential signal types such as TTL, CMOS, LVTTL, RS232 or RS422. The system is capable of ...more
