CI Systems Inc. Products
CI Systems Inc.
CI strives to provide its customers with the most cost effective and reliable solution for every Electro-Optics system it delivers.
-
Background Discrimination Radiometer Send To Colleague A background discrimination radiometer, the BDR provides clear IR contrast of moving targets in air-to-air, ground-to-air and air-to-sea scenarios ...more -
CFT - Field Test IR Collimator Send To Colleague The CFT is a compact, lightweight, self-contained infrared collimator. Designed to withstand severe field environmental conditions. The CFT is used to perform Go/No-Go FLIR testing in the field without the need to disassemble and transport the FLIRs and sights to the lab. For accurate MRTD testing, the CFT embedded software uses a radiometric ...more -
AWBS - Advanced Weapon Boresight System Send To Colleague The AWBS is a new electro-optical boresight for accurately aligning guns and sights. The AWBS utilizes a video camera to allow a single user to align a weapon to a sight from the safety of the gunner's post. The AWBS provides an easy to use, accurate, fast and reliable tool for boresighting yielding a high first round hit probability. ...more -
MWIR - Spectral Imager Send To Colleague The MWIR spectral imager provides hyperspectral radiometric-calibrated measurements of ambient stable scenes. Fast measurements as a result of continuous interferometer scanning. ...more -
MCR-8 high speed radiometer Send To Colleague A high-speed radiometer, the MCR-8 simultaneously reads an object's radiant intensity in up to eight user-defined spectral channels. It is ideal for flare and other dynamic event measurements in the lab and field. ...more -
HUD Tester Send To Colleague The HUD (Head-Up Display) Tester tests the HUD at the Intermediate maintenance level. Automatic verification of the testing, calibration and maintenance operations of FLIR systems. Same test set for different FLIR systems, after changing the mechanical attachment fixtures and connecting bundles. ...more -
MPR single channel radiometer Send To Colleague The MPR is a small portable radiometer designed to measure the radiance of small IR sources within the range of hundreds of meters, which is especially useful in field-test configurations. ...more -
MSS - Missile Signal Simulator Send To Colleague CI System?s missile signal simulator, the MSS, tests the readiness and performance of Missile Warning Systems in the flight line, in regular routine, and close to takeoff. It does so by simulating the changes of the missile?s IR radiation signature from launch through flight to a target. Designed to MIL standard requirements, the MSS withstands ...more -
WFOV - Wide Field of View Collimator Send To Colleague The wide field of view IR test collimator, is used to test thermal imagers in their wide field of view mode of operation. Typical applications include navigational FLIR?s and commercial imagers. CI?s unique compact WFOV is an IR collimator combined with an accurate IR source (CI?s SR 800-2D) and a target wheel. The WFOV provides the means to pe ...more -
ICTS - Integrated Computerized Test System Send To Colleague The integrated computerized test system is used to test a wide range of multi sensor systems including a NFOV FLIR, WFOV FLIR, visible sensors, laser designators, laser range finders, and more. ...more -
IRTG - Infrared Target Generator Send To Colleague The IRTG functions as a hardware in the loop testing of missile guidance systems to evaluate target acquisition, tracking and performance with countermeasures.The IRTG generates an IR scene that is projected it into the entrance aperture of the tested missile. The IRTG is mounted on a flight motion simulator. The IR scene includes a static bac ...more -
DLT & NPT - Depot Level Targeting and Navigation Payload Tester Send To Colleague This tester is for a wide range of pod sensors including: FLIR, CCD, laser designator, range finder, laser spot tracker, and laser marker. ...more -
O-Level Multi Sensor Systems Tester Send To Colleague The O-Level Multi-Sensor Systems tester is designed for FLIR, day sight and laser testing at the flight line. Its configuration makes it easy to add test hardware and tests. ...more -
CATS - Customized Test Systems Send To Colleague With capabilities for both narrow and wide FOV, the CATS is a fully automatic test system that provides clear reproducible results for FLIR and visible system testing on the production floor, lab, and depot. ...more -
DLIPT - Depot Level Imaging Payload Tester Send To Colleague This tester is used for testing multi-sensor payloads that includes FLIRs, CCD cameras, laser designators and laser range finders. ...more -
ILT - Intermediate Level Laser Tester Send To Colleague An I-level laser test station, the ILT tests all the significant parameters of laser range finders and laser designators, including: Pulse energy, pulse width, PRF, beam divergence and range. You can easily operate it in the I level, lab, or depot. With CI's automatic test software, the ILT is a fully automatic comprehensive laser tester. ...more -
SD-300 Send To Colleague SD-300 is a high-etendue interferometer-based spectral imager. It combines high spatial resolution with an easily adjusted spectral resolution that meets your specific application needs. The software package that comes with the SD-300 gives you maximum flexibility to analyze spectral images for parameters you set. ...more -
SR-5000 - Remote Sensing Spectroradiometer Send To Colleague The SR-5000, the gold standard for remote sensing radiometry-based testing, has been recently upgraded to meet today?s testing needs. It includes Windows XP based software, fully integrated imaging options, and a spectral range extension into the UV. With proven results from its 20 years on the market, it is the industry workhorse for a wide ra ...more -
TIRS - The infrared target simulator Send To Colleague The infrared target simulator is a table top simulation system that produces an IR scene that includes a static background, a moving/growing target and a moving/growing flare. The simulator is computer-controlled and includes all the algorithms to transform object space inputs to control commands. ...more -
ICST - Infrared Countermeasures Sensor Tester Send To Colleague The Infrared Countermeasures Sensor Tester (ICST) simulates a realistic, dynamic scenario for sensor testing at the lab and depot level. In the scenario, the following components are controlled: The target?s position relative to the sensor. The temperature of the IR source. The sensor?s rotational position ...more -
ILET - Intermediate Level Electro-optical tester Send To Colleague CI Systems?s ILET (Intermediate Level Electro-optical tester) family of test systems are most suitable for performing optical and Boresight tests at the I level and in the laboratory. CI?s compact, computerized ILET may be used as a mobile test station (van mounted) and enable full testing of thermal imagers and visible sensors without recourse ...more -
AMBS - Airborne Multi-sensor Boresight System Send To Colleague The AMBS is a high performance multi-sensor boresighting system designed to provide the capability for in-flight alignment of the lines of sight (LOS) of multiple sensor payloads. The AMBS alignment may be performed between FLIRs, day sights, and various lasers. It is designed to work in the 0.4 to 15µm spectral band. ...more -
Visible Collimator Send To Colleague The Visible Collimator combines high performance optics with a uniform light source to provide a testing tool for CCD, CID and any other day sights. Encased in an aluminum cylinder, its construction is sturdy and rugged. While manual and motorized target wheels are available, its standard target holder makes switching between targets accurate a ...more -
Universal FLIR Tester Send To Colleague The Universal FLIR Tester is a modular universal FLIR tester that performs all Electro - Optical tests for any FLIR type on the System and the LRU level. Automatic tests, calibration and maintenance of FLIR systems. ...more -
DFLT - Depot & Field Level Laser Tester Send To Colleague The DFLT offers fast, reliable, easy to operate and versatile testing of laser range finders and laser designators in the field or lab/depot. The DFLT tests all the significant parameters of laser systems such as energy, pulse width, PRF, coding, beam divergence, range simulation & receiver sensitivity. ...more
