Electronic Specialties Inc. Products
Electronic Specialties Inc.
For Automotive, Marine, Small Engine, HVAC & Industrial Technicians
-
700 BATTERY TESTER Send To Colleague 
The #700 has an internal loading capacity of 100 amps. It is a great tool for finding batteries that can?t stand up to the load of today?s automotive accessories. It will also test relative starter current draw and charging voltage. ...more -
710 - 500 AMP CARBON PILE LOAD TESTER Send To Colleague 
The #710 will perform variable load testing on 12 volt batteries rated as high as 1000 Cold Cranking Amps. Use this battery tester to simulate actual cranking loads. Also tests alternator charging voltage and relative starter current draw. The #710 features large dual meters to display the battery voltage and load current simultaneously, during ...more -
325 EZ-TACH DIGITAL AUTOMOTIVE TACHOMETER Send To Colleague 
The EZ-Tach makes RPM measurements quick and easy. This is a very useful tool for tune-up and other diagnostic work where accurate RPM readings are required. Just clamp over any spark plug wire and get accurate RPM on conventional or DIS ignition systems. The unit also features a data hold function. The large 2000 count LCD display shows; RPM, ...more -
380 DIGITAL MULTIMETER Send To Colleague 
This digital multimeter has the compact design and the functions you need for overall convenience. Its capabilities are equal to many higher priced multimeters. Comes with test leads, protective holster, instructions and installed 9 volt battery. ...more -
501 DIGITAL MINI MULTIMETER Send To Colleague 
This is an economical digital multimeter that can?t be beat. The #501 has the capabilities of full range units but is small enough to fit in your pocket. Its low price will surprise you! Includes test leads, protective holster, instructions and installed battery. ...more -
550 - Insulation Tester Send To Colleague 
The 550 is used to check high voltage circuits on Hybrid cards for leaks to ground. The 550 can supply 250V, 500V and 1000V test voltages for doing complete insulation testing. You can not easily test for high voltage leakage without a high volt test source. The 550 is auto-ranging and can measure up to 2000 MegaOhm with a resolution of 1 K Ohm. ...more -
696 HIGH CURRENT PROBE 600 AMPS MAX. Send To Colleague 
Use this instrument to test starting and charging systems. It can even be used to test relative compression when used with your lab scope or graphing meter. Unit is designed for use with digital multimeters, lab scopes or graphing meters. Output of the probe is 1mV/Amp. ...more -
595 PRO MODEL AUTOMOTIVE METER W/PC INTERFACE Send To Colleague The #595 is a premier automotive diagnostic tool. It is equipped with the latest testing capabilities, including Milliseconds Pulse Width, for measuring the on-time of fuel injectors. The #595 features a huge LCD display w/bargraph for easy viewing. This meter can even be interfaced to your PC or notebook computer for enhanced diagnostics and ...more -
480A AUTO-RANGING DIGITAL MULTIMETER Send To Colleague 
The #480A is a high precision Auto-ranging DMM that can help you troubleshoot all types of electrical problems. Just set to the desired test function and the unit automatically selects the proper test range.Includes test leads, protective holster, instruction manual and two AA batteries. ...more -
655 HIGH CURRENT PROBE/DMM Send To Colleague 
Another great tool for all around electrical troubleshooting. The #655 is ideal for all high current applications, especially starting and charging diagnostics. The #655 can measure up to 1000 Amps AC or DC. Unit features built-in degrees F and C temperature readings ...more -
590 PROFESSIONAL AUTOMOTIVE DMM Send To Colleague 
Another good choice for the professional automotive technician, the #590 puts the right cababilies in your hands. For example, the #590 can test the on-time of fuel injectors using the Ms pulse width test function. This DMM is completely auto-ranging, making it an easy and efficient tool to use. ...more -
MODEL #130 SELF-POWERED INDUCTIVE CLAMP TIMING LIGHT Send To Colleague 
The original battery powered timing light, built with quality to last. There is no need to connect to a 12 volt battery for power. This unit is powered by two “D” cell flashlight batteries. Great tool for marine, smowmobile, industrial, racing engines and other small engine timing. Don’t accept a copy. ...more -
EST-65 INFRARED THERMOMETER Send To Colleague 
High quality construction w/rubber insert in grip, nose & LCD areas. Temperature Range: -58° to 1022°F (-50° to 500°C). For Automotive, Marine, Small Engine, HVAC & Industrial Technicians. ...more -
332 Pro Laser Tachometer Send To Colleague 
For Automotive, Marine, Small Engine, HVAC & Industrial Technicians. The #332 is the ideal tool for easy and accurate measurement of RPM in almost any environment. Simply aim the laser beam at a reflective mark placed on a rotating device, push the button and the RPM reading is immediately displayed. No contact with the shaft or wheel is necessary. ...more -
EST-75 HIGH TEMP IR THERMOMETER - PRO MODEL Send To Colleague 
For Automotive, Marine, Small Engine, HVAC & Industrial Technicians. EXTREME HIGH TEMP RANGE, UP TO 1832°F. High quality, professional tool. Long distance to spot ratio of 12 to 1. ...more -
136 THE MAG LEAD Send To Colleague 
Need to stick to a good ground or test point? Get the Mag Lead, a great new product. Mag Lead features a magnetic disconnect near the test probe end. Just disconnect the test probe and you can ?stick? to any metallic ground or test point. ...more -
585 DELUXE AUTOMOTIVE METER WITH RPM & TEMPERATURE Send To Colleague 
The #585 is a professional grade tool used for diagnosing electrical, computer and engine problems on any vehicle. The #585 includes two sets of test leads, RPM pick-up, temperature probe, protective holster, 9 volt battery, instructions manual and carrying case. Inductive RPM pick-up features a five position, adjustable sensitivity switch. ...more -
MODEL #150 INDUCTIVEPICK-UP TIMING LIGHT Send To Colleague 
his hard working timing light is accurate up to 8,000 RPM. An extremely bright flash will help you time the engine. The break and shock resistant plastic housing, reduces damage from accidental drops. ...more -
EST-70 PRO MODEL INFRARED THERMOMETER Send To Colleague 
High quality, professional tool. High temperature range. Long distance to spot ratio of 12 to 1. Temperature Range: -58° to 1022°F (-50° to 500°C). For Automotive, Marine, Small Engine, HVAC & Industrial Technicians. ...more -
FUSE BUDDY Current Loop Send To Colleague 
#307M FUSE BUDDY Current Loop - Mini. #308B FUSE BUDDY Current Loop - ATC. Easy testing access, plugs right into fuse socket, no more hand made adapters. ...more -
695 LOW CURRENT PROBE FOR GRAPHING METERS, SCOPES & DMM s Send To Colleague 
Great tool for accurate measurement of low current. Use with your graphing meter or lab scope to view current waveforms on fuel injectors, fuel pumps, primary ignition coils and more. Also works very well with digital multimeters. Resolution of 10 milliamps is low enough for most parasitic drain testing. ...more -
706 DIGITAL BATTERY TESTER WITH AUTOMATIC TEST Send To Colleague 
Controlled by microprocessor, simply activate the switch once and the #706 applies a precisely timed, 10 second load to the battery. The test results, ?OK?,?WEAK? or ?BAD? are then displayed along with the test voltage, until the unit is disconnected. The #706 also tests charging voltage and relative starter current draw. ...more -
330 LASER TACHOMETER Send To Colleague 
The #330 is the ideal tool for easy and accurate measurement of RPM in almost any environment. Simply aim the laser beam at a reflective mark placed on a rotating device, push the button and the RPM reading is immediately displayed. No contact with the shaft or wheel is necessary. ...more -
EST-20 POCKET IR THERMOMETER Send To Colleague 
Fits in your shirt pocket, yet performs like premium units! Measures up to 518 degrees F. Distance to spot ratio of 6 to 1. Features built-in Laser pointer and backlit LCD display ...more -
685 CURRENT PROBE/DMM Send To Colleague 
The #685 is a great tool for all purpose electrical testing. Applications include: fuel injection systems, fuel pumps, charging systems, electric motors, and most parasitic drains. Capable of measuring as low as 10 milliamps! ...more
