AcQ Inducom Products
AcQ Inducom
Since the establishment in 1985 from Inducom Systems we have developed into a very successful and modern organisation with a team of enthusiastic specialists, who are willing to go to the limit day after day to achieve their goal: the successful completion of projects.
-
ccPMC430 - Conduction cooled Storage PMC with (SecureErase and) WriteProtect functions Send To Colleague The ccPMC430 provides advanced levels of data security for sensitive applications in military and commercial environments. Write protection prevents unwanted erasure, overwrite, or modification of sensitive data and operating system information. The Secure-Erase mode enables rapid and thorough destruction of that data when required. The ccPMC43 ...more -
ccPMC430 - Conduction cooled Storage PMC with (SecureErase and) WriteProtect functions Send To Colleague The ccPMC430 provides advanced levels of data security for sensitive applications in military and commercial environments. Write protection prevents unwanted erasure, overwrite, or modification of sensitive data and operating system information. The Secure-Erase mode enables rapid and thorough destruction of that data when required. ...more -
PCI385 - Universal Timer/Counter for PCI Send To Colleague The PCI385 Universal Timer Counter PCI card is an ideal solution for automated test and measurement applications. The PCI385 features two timer/counter inputs. Both inputs have a coaxial connector for the input range of +/- 10 V and high-voltage pins for the input range of +/- 300 V. The coupling of the inputs is either AC or DC. The PCI385 pro ...more -
PCI390 - RTD Measurement for PCI Send To Colleague The PCI390 features six 2-, 3-, or 4-wire high-accuracy RTD measurement channels. Each channel has programmable alarm limits on which an interrupt can be issued. The local DSP (TMS320C203) performs linearization, auto-calibration and alarm-limit checking. Sensor-data is available in ºC, ºF, K and Ohms. All inputs are optically isolated from the ...more -
PCI392 -16 Channel ADC for PCI Send To Colleague The PCI392 16-Channel Common-Mode Input ADC for PCI is very well suited to be used in applications in which autonomous signal conversion is an issue, as well as in standard mid-range applications. Enabled channels are scanned at maximum rate and conversion results are stored in shared memory. A local DSP performs all functionality like calibr ...more -
PCI393 - 8 Channel ADC for PCI Send To Colleague The PCI393 8-Channel Differential Input ADC for PCI is very well suited to be used in applications in which autonomous signal conversion is an issue, as well as in standard mid-range applications. Enabled channels are scanned at maximum rate and conversion results are stored in shared memory. A local DSP performs all functionality and user-spec ...more -
PCI393 - 8 Channel ADC for PCI Send To Colleague The PCI393 8-Channel Differential Input ADC for PCI is very well suited to be used in applications in which autonomous signal conversion is an issue, as well as in standard mid-range applications. Enabled channels are scanned at maximum rate and conversion results are stored in shared memory. A local DSP performs all functionality and user-spe ...more -
PCI395 - 12/16-bit 16 Channel DAC for PCI Send To Colleague The PCI395 features 16 analog voltage outputs, integrated on the factory standard, ANSI certified M-module standard. Each output has a 12- or 16-bit resolution and a software programmable output range (0..+10V or -10..+10V). Control of the analog output is as easy as writing the binary equivalent to a dedicated register (per channel). Conversio ...more -
PCI395 - 12/16-bit 16 Channel DAC for PCI Send To Colleague The PCI395 features 16 analog voltage outputs, integrated on the factory standard, ANSI certified M-module standard. Each output has a 12- or 16-bit resolution and a software programmable output range (0..+10V or -10..+10V). Control of the analog output is as easy as writing the binary equivalent to a dedicated register (per channel). ...more -
PIM481-J and PIM-DSUB PIM481-J and PIM-DSUB PMC I/O Modules Send To Colleague The PIM481-J PMC I/O Module, with four 3.5mm stereo connectors and the PIM481-DSUB PMC I/O Module, with D-sub for rear I/O can be mounted on a rear transition module (RTM). ...more -
PMC400 - 100Mbps Ethernet PMC Adapter Send To Colleague The PMC400 is designed to interface with any suitable PMC compliant carrier, using a PCI version 2.1 compliant interface (IEEE P1386.1 Draft 2.0) and is capable of operating as 10BASE-T (IEEE 802.3) or 100BASE-Tx (IEEE 802.3u) via a front mounted standard RJ45 connector. Features Intel 21143 LAN Controller. Software support is widely provided ...more -
PMC403 - MIL-STD-1553 Card Send To Colleague The PMC403 is an intelligent interface card providing full MIL-STD-1553 test, simulation and bus analysis capability for the PCI Mezzanine standard, with 1553A, 1553B, McAir and STANAG 3838 variants in one card. The PMC403 supports concurrent Bus Controller (BC) and up to 31 Remote Terminals (RT) with Bus Monitor (BM). ...more -
PMC403 - MIL-STD-1553 Card Send To Colleague The PMC403 is an intelligent interface card providing full MIL-STD-1553 test, simulation and bus analysis capability for the PCI Mezzanine standard, with 1553A, 1553B, McAir and STANAG 3838 variants in one card. The PMC403 supports concurrent Bus Controller (BC) and up to 31 Remote Terminals (RT) with Bus Monitor (BM). ...more -
PMC404 - STANAG 3838/3910 Card Send To Colleague The PMC404 is a slot intelligent interface card providing complete STANAG 3838 and STANAG 3910 test, simulation and bus analysis capability for the PCI Mezzanine standard. The PMC404 supports concurrent Bus Controller (BC) and up to 31 Remote Terminals (RT) with Bus Monitor (BM). An additional stand-alone Chronological Bus Monitor (CBM) facilit ...more -
PMC450 - PMC FPGA 8 channel Serial Controller Card with front and rear I/O Send To Colleague The PMC450 is a FPGA-based 8 channel RS422 serial card with front and rear I/O. The standard configuration consists of a PCI-core and eight 16C550-uart compatible cores. With the 32 onboard RS422 transceivers 8 serial RS422 channels (Rx, Tx, RTS and CTS) are created. The PMC450 features a 68-pin high dense connector at the front for the connect ...more -
PMC450 - PMC FPGA 8 channel Serial Controller Card with front and rear I/O Send To Colleague The PMC450 is a FPGA-based 8 channel RS422 serial card with front and rear I/O. The standard configuration consists of a PCI-core and eight 16C550-uart compatible cores. With the 32 onboard RS422 transceivers 8 serial RS422 channels (Rx, Tx, RTS and CTS) are created. The PMC450 features a 68-pin high dense connector at the front for the connect ...more -
PMC451 - PMC FPGA-based 16/24 channel serial communication controller card Send To Colleague The PMC451 is a PMC FPGA-based 16/24 channel serial card with front and rear I/O. The standard configuration consists of a PCI-core and sixteen (UART16) or twentyfour (UART24) 16C550-uart compatible cores. The PMC451 has a software configurable physical interface. This card offers the user the possibility to create a combination of RS232 and RS ...more -
PMC451 - PMC FPGA-based 16/24 channel serial communication controller card Send To Colleague The PMC451 is a PMC FPGA-based 16/24 channel serial card with front and rear I/O. The standard configuration consists of a PCI-core and sixteen (UART16) or twentyfour (UART24) 16C550-uart compatible cores. The PMC451 has a software configurable physical interface. This card offers the user the possibility to create a combination of RS232 and RS ...more -
PMC481 - PMC Audio Card with front and rear I/O Send To Colleague The PMC481 is a PMC audio card with front and rear I/O. The audio card is based on the Crystal CS4281 CrystalClearTM PCI Audio Interface controller and the Crystal CS4299A CrystalClearTM SoundFusionTM Audio Codec '97. The PMC481 features four audio connections via the front panel using 3.5mm stereo connectors. ...more -
PowerNECS Send To Colleague PowerNECS is a NECS system with PowerPC Technology. The base unit consists of the power supply and the bus master module supporting one M-module that can be stacked on it. The master module is based on an MPC555 microcontroller operating at 40 MHz clock frequency and provides dual TPU and CAN interfaces, IrDA and two PCMCIA card slots. ...more -
USB403 -USB403 MIL-STD-1553 Portable Interface Unit Send To Colleague The USB403 is a Portable Interface Unit providing full MIL-STD-1553 test, simulation and bus analysis capability in a compact self-contained unit, to connect via a USB interface to suitable host systems. The unit provides support for all 1553A, 1553B, McAir and STANAG 3838 variants in a self contained battery operated unit, and is supplied with ...more -
VME1340 - CompactFlash VMEbus Board Send To Colleague The VME1340 is used to add a CompactFlash card slot to a 3U VMEbus System. CompactFlash is a small form factor card standard that encompasses CompactFlash (CF) flash data storage cards, magnetic disk cards and I/O cards. The VME1340 supports all of these types CompactFlash cards. The VME1340 has one card interface slot which supports type I ...more -
VME2303 - MIL-STD-1553 Two Channel VMEbus Board Send To Colleague The VME2303 is an intelligent interface card for two channel, dual redundant MIL-STD-1553 applications. It gives full MIL-STD-1553 test, simulation and bus analysis capability on the VME bus, providing 1553A, 1553B, McAir and STANAG 3838 variants in a single card. Each channels supports concurrent Bus Controller (BC) and up to 31 Remote Termina ...more -
VME302 - 16 Channel ARINC-429 Controller for VMEbus Send To Colleague The VME302 provides sixteen ARINC-429 compatible channels (8x receive and 8x transmit) at any rate between 12.5 and 100kbps. Because the VME302 is built upon a flexible platform, the user interface is extremely versatile and user functions can be implemented almost without restriction, making this product flexible and user-friendly. ...more -
VME321 - Stepper Motor Controller for VMEbus Send To Colleague The VME321 Intelligent Stepper Motor Controller with Amplifiers is an ideal solution for all applications where stepper motors must be controlled with a maximum of flexibility and a minimum of overhead. The local processor handles all high-level commands to provide maximum control for both straightforward as very complex applications. This VME ...more