Design and Manufacture of handheld test equipment including underground cable locators.
|Sponsor Your Catalog|
GFL3000 - Ground Fault Locator The GFL3000 is the perfect fault locator for pinpointing the location of nicked, damaged, or cut wires. The only requirement is that there be a path to ground for current to flow. Very easy to operate. • Locates Buried Ground Faults. • Dual Power Capability (Hi/Lo). • Audible 'On' Beeper. • Battery Power Indicator. • Custom Molded Case. • Rechargeable Battery (Includes Battery and Charger).
Pro220K Advanced Tone and Probe Kit The Pro220K Advanced Tone and Probe Kit is the latest technology in wire identification. The Pro220K now features an LED headlight for dark areas, AC noise rejection, AA battery power, low battery light, and more. Unfamiliar with tones and probes? They are uniquely designed to identify the termination point of a wire or cable, where the end point of that wire is unknown. Being inductive, no wire stripping is needed on the far end.
Pro290 Underground Wire and Cable Locator The unique Pro290 Wire and Cable Locator is a new tool for contractors or homeowners working with cable TV, telephone, landscape lighting, invisible fences, or general cabling. The Pro290 consists of a transmitter and receiver with enough power to track wires up to 1000ft in length and up to 4 feet deep. The Pro290 uses an easy to track 33khz frequency, a null tracking signal mode, and setups up in less than a minute. Very low cost item makes it affordable for everyone.
Pro300 - Residential Wire and Valve Locator The Pro300 Wire and Valve Locator sets up and works just like the larger commercial Pro700 and Pro800D models. Simply place the included ground stake directly into the earth and attach one alligator clip to it. Then, attached the other alligator clip the wire you want to track. Next, follow the path of the null beeps to track the wire. Should a wire be cut or broken, the signal will stop there. Lost solenoids are also easy to find with our residential valve locator, as the signal will change over the solenoid, indicating its location.
Pro400 - Handheld Graphical TDR Fault Finder The Pro400 Graphical TDR is a great tool for locating faults in metallic cables with 2 conductors. Twisted pair, coax, LAN cabling, etc. are simple to test for distances to shorts, opens, etc. By connecting the leads to the cable to test, a graphical display quickly and easily shows faults and 'events' on that cable.
Pro48 - Irrigation Solenoid Activator and Clock Tester The Pro48 is a new, low cost hand held tester that chatters and opens solenoids, verifies clock 24v output, checks wires for shorts or opens, and tones. All of these features add handy capability to any irrigation or green contractors tool box and for less than $100, doesn't cost a lot of money. Uses 2 9v batteries (not included). The Pro210F probe is optional.
Pro48K - Multi-Function Irrigation System Test Kit The Pro48K Multi-Function Irrigation System Test Kit is a complete, portable battery-operated irrigation system diagnostic kit priced for easy purchase and ownership. This kit consists of a Pro48 Solenoid Activator, the Pro210F Tone Probe and a Pro21 carrying case.
Pro700 - Wire and Valve Locator The Pro700 Underground Wire and Valve Locator is perfect for irrigation contractors and maintenance personnel. Incorporating a powerful transmitter and sensitive receiver, the Pro700 tracks irrigation wires, finds missing valves and detects serious damage to vulnerable underground cabling.
Pro800D - Hi-Power Wire and Valve Locator The Pro800D Underground Wire and Valve Locator for sprinkler and irrigation professionals sets a new standard for features and functionality. The Pro800D replaces the best selling Pro800 locator, modifying the transmitter battery power from rechargeable to 8 D cell batteries.
Pro871C - Armada Pro871C Underground Cable and Wire Locator The Pro871C Underground Cable Locator is a low cost locator for contractors and maintenance personnel. Incorporating 5 different tracking frequencies/methods, the Pro871C tracks many types of cabling, including CATV, electrical, telephone, and lighting. The Pro871C transmits an easy to follow beep signal that is tracked by the receiver. also included are peak or null tracking and passive 50/60Hz detection. The Pro871C really does give a lot of value for the money.
Pro90 - Automatic Clamp Multimeter The Pro90 Automatic Multimeter is everything you will ever need in a multimeter. Called automatic, the Pro90 has only one button, the on/off switch. Once the user turns the Pro90 on, the tester does the rest. Measures volts AC or DC, resistance, and AC current. Includes a backlit screen for darker environments.
Pro91 - True RMS Automatic Clamp Multimeter The Armada Technologies Pro91 is a unique, brand new True RMS Automatic Clamp multimeter that has no peer. This one-of-a-kind meter combines the accuracy of True RMS with the sophistication and ease of a completely automatic meter. There is literally only an on/off button to work with, everything else is done automatically by the Pro
Pro93 - True RMS 2-Wire Milliamp Clamp Meter The Pro93 also utilizes True RMS technology. True RMS stands for "Root Mean Squared," which is an obscure term if you're not an electrical engineer. But in practice, it means the Pro93 uses a more accurate measuring system than conventional clamp multimeters.
Pro30 - Digital Multimeter The Pro30 Digital Multimeter is a basic tester for identifying wiring faults. Specifications include; DCV:0-500V. ACV:0-500V. DCA:0-200mA. R:0-2Mohm. Audible continuity: <50ohm. Diode test. Battery: 9-12Vx1, GP23A
Results 1 - 14 of 14
- Activators (2)
- Alligator Clips (1)
- Boxes (1)
- Cable Fault Locators (1)
- Cable Locators (5)
- Chargers (1)
- Clamp Meters (2)
- Clamp Multimeters (3)
- Clamps (3)
- Clips (1)
- Clocks (1)
- Diagnostics (1)
- Fault Locators (2)
- Locators (6)
- Meters (2)
- Multimeters (4)
- Probes (3)
- Receivers (3)
- Testers (3)
- Transmitters (3)
- »See all 29 Categories