National Instruments


National Instruments is a technology pioneer and leader in virtual instrumentation - a revolutionary concept that has changed the way engineers and scientists in industry, government, and academia approach measurement and automation.
Phone (512) 794-0100
Fax (512) 683-8411
Address 11500 N Mopac Expwy
Austin , TX 78759-3504
United States
Email info@ni.com
Sponsor Your Catalog
  • NI-SCOPE 3.5 - Windows 2000/XP/Vista/Vista x64 This easy-to-use software seamlessly integrates the full functionality of your high-speed digitizer hardware into LabVIEW, Measurement Studio, C/C++, and Visual Basic. NI-SCOPE also includes the Scope Soft Front Panel, so you can start using NI high-speed digitizers with no programming at all. NI-SCOPE implements multirecord acquisition, continuous acquisition, multiboard synchronization, more than 50 measurement and analysis functions , as well as the functionality of traditional oscilloscopes.
    National Instruments
  • NI Driver Software for Digital I/O National Instruments includes the robust, easy-to-use NI-DAQ driver software with its digital I/O and other DAQ device. It tightly integrates the full functionality of your digital I/O hardware to LabVIEW, Measurement Studio, C/C++, and Visual Basic. NI-DAQ implements a variety of digital I/O operations. High-performance features include multidevice synchronization, networked measurements, and DMA data management. Bundled with NI-DAQ, the Measurement & Automation Explorer utility simplifies hardware configuration with device test panels, interactive measurements, and scaled I/O channels.
    National Instruments
  • NI Driver Software for Counter/Timer This easy-to-use software tightly integrates the full functionality of your counter/timer hardware to LabVIEW, Measurement Studio, C/C++, and Visual Basic. NI-DAQ implements a variety of counter/timer input operations. High performance features include multidevice synchronization, networked measurements, and DMA data management. Bundled with NI-DAQ, the Measurement & Automation Explorer (MAX) utility simplifies the configuration of your measurement hardware with device test panels, interactive measurements, and scaled I/O channels.
    National Instruments
  • NI USB-232 - 1-Port RS232 Interface for USB 1-port USB RS232 serial interface with integrated 2 m USB-A cable, D-Sub 9-Pin male connector Compatible with any application that uses COM ports on Windows Vista/XP/2000 PCs Standard baud rates up to 230.4 kb/s, 128 B transmit-and-receive FIFOs Fully functional RS232 port, including RTS/CTS hardware handshake lines Easy programming in NI LabVIEW, NI LabWindows™/CVI, and ANSI C/C++ with NI-VISA API
    National Instruments
  • NI Measurement Studio Enterprise Edition National Instruments Measurement Studio is the complete integrated measurement solution of tools created specifically for Visual Basic, Visual Studio .NET, and Visual C++ programmers. The Enterprise Edition also includes NI LabWindows/CVI for easily creating ANSI C-based virtual instrument applications. NI Measurement Studio is designed for engineers and scientists building measurement and automation applications. Measurement Studio delivers the measurement expertise of National Instruments with the programming language of your choice. With the added power of the tools Measurement Studio provides, you will increase efficiency and save time.
    National Instruments
  • NI Measurement Studio Professional Edition National Instruments Measurement Studio is the complete integrated measurement solution that includes tools created specifically for Visual Studio .NET, Visual C++, and Visual Basic 6.0 programmers. It is designed for engineers and scientists building test, measurement, and control applications. NI Measurement Studio delivers the measurement expertise of National Instruments to the programming language of your choice.
    National Instruments
  • NI Vision Development Module for Measurement Studio and LabWindows/CVI National Instruments vision development software includes IMAQ Vision, a library of vision functions, and IMAQ Vision Builder, an interactive environment for prototyping vision applications. The vision development software is for scientists, automation engineers, and technicians who are developing machine vision and scientific imaging applications in LabWindows/CVI, Visual Basic, or Visual C++. IMAQ Vision Builder is for developers who need to quickly prototype vision applications without programming or who need to test and learn how vision processing functions work. IMAQ Vision is a library of CVI function panels and ActiveX controls for vision processing. Unlike other vision products, IMAQ Vision Builder and IMAQ Vision work closely together to simplify vision software development, so you can apply vision in your measurement and automation applications.
    National Instruments
  • NI PXI-8460/2 - 2-Port Low-Speed/Fault-Tolerant NI-XNET CAN Interface, PXI 2-port low-speed/fault-tolerant CAN interfaces (up to 125 kbit/s) with onboard TJA1045A transceivers NI-XNET driver for developing frame and signal applications in LabVIEW, LabWindows™/CVI, and C/C++ NI-XNET device-driven DMA engine for coupling the CAN bus to host memory to minimize message latency Integrated CAN databases for importing, editing, and using signals from FIBEX, .DBC, and .NCD files
    National Instruments
  • NI PXI-8461/2 - 2-Port High-Speed NI-XNET CAN Interface, PXI 2-port high-speed CAN interface (up to 1 Mbit/s) with onboard TJA1041 transceivers NI-XNET driver for developing frame and signal applications in LabVIEW, LabWindows™/CVI, and C/C++ NI-XNET device-driven DMA engine for coupling the CAN bus to host memory to minimize message latency
    National Instruments
  • NI PXI-8464/1 - 1-Port Software-Selectable NI-XNET CAN Interface, PXI 1-port XS CAN interface with HS (TJA1041), LS/FT (TJA1045A), and single-wire (AU5790) transceivers NI-XNET driver for developing frame and signal applications in LabVIEW, LabWindows™/CVI, and C/C++ NI-XNET device-driven DMA engine for coupling the CAN bus to host memory to minimize message latency
    National Instruments
  • NI PXI-8464/2 - 2-Port Software-Selectable NI-XNET CAN Interface, PXI (TJA1045A), and single-wire (AU5790) transceivers NI-XNET driver for developing frame and signal applications in LabVIEW, LabWindows™/CVI, and C/C++ NI-XNET device-driven DMA engine for coupling the CAN bus to host memory to minimize message latency
    National Instruments
  • NI PXI-8512/2 - 2-Port High-Speed NI-XNET CAN Interface, PXI 2-port high-speed CAN interface (up to 1 Mbit/s) with onboard TJA1041 transceivers NI-XNET driver for developing frame and signal applications in LabVIEW, LabWindows™/CVI, and C/C++ NI-XNET device-driven DMA engine for coupling the CAN bus to host memory to minimize message latency
    National Instruments
  • NI Measurement Studio - Software National Instruments Measurement Studio is an integrated suite of native measurement and automation controls, tools, and class libraries for Visual Studio .NET and Visual Studio 6.0. NI Measurement Studio dramatically reduces application development time with ActiveX and .NET controls, object-oriented measurement hardware interfaces, advanced analysis libraries, scientific user interface controls, measurement data networking, wizards, interactive code designers, and highly extensible classes. Building on more than 16 years of measurement programming expertise, National Instruments created Measurement Studio with tools designed specifically for Microsoft Visual Basic, Visual C# .NET, and Visual C++ to bring you simplified integration with data acquisition and instrument control interfaces for easier hardware integration. With Measurement Studio, you use your Visual Studio programming knowledge to get measurements started quickly and create a complete measurement solution - all the way from acquiring to analyzing to presenting.
    National Instruments
  • NI-FGEN This easy-to-use software seamlessly integrates the full functionality of your generator hardware into LabVIEW, Measurement Studio, C/C++, and Visual Basic. NI-FGEN also includes the Source Soft Front Panel, so you can start using NI arbitrary waveform and function generators with no programming at all. NI-FGEN implements frequency sweeping and hopping, waveform linking and looping, and frequency shift keying (FSK) modulation for complex measurement solutions.
    National Instruments
  • NI-SWITCH - IVI-Compliant Instrument Driver for Switches IVI-Compliant Instrument Driver for Switches - The driver works with NI LabVIEW, LabWindows/CVI, and Measurement Studio (for Microsoft Visual Basic and Visual C++). NI-SWITCH also provides a soft front panel so you can quickly and easily access hardware.
    National Instruments
  • NI Switch Executive - Switch Configuration, Routing, and System Management Application National Instruments Switch Executive is an intelligent switch management and routing application that simplifies switch system configuration and increases test performance, ultimately lowering cost to test. NI Switch Executive, named one of EDN's Top 100 Products of 2002, is an intuitive switch configuration, routing, and system management application. NI Switch Executive features: Multimodule integration, Effortless system configuration, Scalable programming and maintenance, Control of NI and third-party switches, Integration with TestStand, LabVIEW, LabWindows/CVI, Visual Basic, C++, and C#
    National Instruments

Results 1 - 16 of 16