Showing results: 1 - 15 of 39 items found.
-
ML4025-BTP -
multiLane
The ML4025 is a fully featured, cost effective four channels equivalent time sampling oscilloscope.
-
ML4079D -
multiLane
The ML4079D is a fully featured 400G BERT that can be configured as an 8-channel PAM4 30 GBaud or 8-channel NRZ 30 Gbps lanes. The receivers support FEC decoding (802.3bj KR4/scaled KP4) and will return the frame loss ratio for FEC scenarios and BER for unframed data. The receivers also show the eye’s Histogram and the channel’s SNR over time. The transmitters Support all standard test patterns mandated by IEEE and OIF such as PRBSQ13, SSPRQ, PRBSQ31, QPRBS13CEI, etc… The user may also program the TX to output a user-defined pattern up to 32 kb long. The transmit power is adequate for testing up to 10 Km SMF links.
-
ML4039E -
multiLane
The ML4039E is a fully featured 400G BERT that can be configured as a 4-channel PAM4 53 GBaud or 4-channel NRZ 28/53 Gbps lanes. Also half rates of 26GBd are supported in PAM mode. The transmitters Support all standard test patterns mandated by IEEE and OIF such as PRBS13Q, SSPRQ, PRBS31Q, etc… The user may also program the TX to output a user-defined pattern up to 131 kb long. The transmit power is adequate for testing up to 10 Km SMF links.
-
ML4070-SFP -
multiLane
The ML4070-SFP is a state of the art transceiver test set specifically designed for quick production testing Go/No Go applications. It features Pulse Pattern Generators and Error Detectors as well as SFP host control circuitry with power supply noise injection capability. The ML4070 has got 3 SFP ports for 0 dB trace loss, 9 dB trace loss and for loopback. A full set of APIs and a production GUI enable quick one-button measurements and automatic report generation.
-
ML4070-QSFP -
multiLane
The ML4070-QSFP is a state of the art transceiver test set specifically designed for quick production testing Go/No Go applications. It features Pulse Pattern Generators and Error Detectors as well as QSFP host control circuitry with power supply noise injection capability. The ML4070 has got 3 QSFP ports for 0 dB trace loss, 9 dB trace loss and for loopback. A full set of APIs and a production GUI enable quick one-button measurements and automatic report generation.
-
ML4039-JIT-BTP -
multiLane
The ML4039-JIT series is a state of the art 4 Lane Pulse Pattern Generator and Error Detector with Jitter Generator & Equalizer up to 30 Gbps. It is fully featured for lab and production testing of systems, components, and Electro-Optical Modules. It has low intrinsic jitter – typically 330 fs – and features built-in jitter and interference modulators specifically designed to enable easy CAUI4 compliance testing.
-
ML4079 -
multiLane
The ML4079 is a low cost 8 Lane Pulse Pattern Generator and Error Detector up to 30.2 Gbps that is fully featured for lab and production testing of systems, components, and EIectroOptical Modules. This instrument covers all the critical bit-rates for 10, 40, 100 and 200G Ethernet, 16 and 32GFC as well as CPRI. The instrument has instrument-grade 2.92 mm connectors.
-
ML4039EN -
multiLane
The ML4039EN is a fully featured 400G BERT that can be configured as a 4-channel PAM4 56 GBaud or 4-channel NRZ 28/56 Gbps lanes. Also half rates of 23 to 29 GBd are supported.
-
ML4067-112 -
multiLane
The 112G HSIO ecosystem compels semiconductor and system vendors to rely on new techniques and technologies to validate their designs. Novel equalization methods carry the major responsibility of recovering lossy signals and must be characterized in realistic environments.The MultiLane ML4067-112-24/18 112G channel board is an ideal tool for this purpose. Featuring a variety of carefully designed differential test traces, this passive test accessory adds precise ISI (inter-symbol interference) in order to calibrate or stress test DSPs, modules, gearboxes or other relevant systems in real-life environments.
-
multiLane
OSFP800 has emerged as a leading standard to drive the development of 800G ecosystem. The MultiLane OSFP800 development kit is an essential tool to ensure the validity of your OSFP800 products. The module compliance board (MCB) is used to test transceivers, AOCs, active cables and DACs, while the host compliance board (HCB) enables the testing of system host ports. The loopback modules (LB) provide an economical way to test thermal capacity and signal integrity of system host ports at every stage of the process: R&D validation, production testing, and field testing.
-
multiLane
With the accelerated growth of hyperscale datacenters, Ethernet network infrastructure performance demands are increasing exponentially, and customer expectations for high-speed data throughput are at an all-time high.Other high-speed I/O protocols such as PCIe Gen 5 and 6 are also gaining momentum. Arbitrary Waveform Generators are the ideal general-purpose development tool for validating high-speed receivers and are extremely flexible instruments for coherent module development.
-
multiLane
In an everchanging industry, new form factors are launched to support higher speeds like 800G and later, 1.6T. With the speed per lane increasing exponentially, the need for thermal and cooling tests also rises with new requirements and demands.MultiLane is offering a OSFP-XD thermal load with a controller board, with the goal of emulating transceiver thermal behavior, but also to test cooling systems.
-
multiLane
QSFP-DD800 has emerged as a leading standard to drive the development of 800G ecosystem. MultiLane provides a QSFP-DD800 development kit that includes a module compliance board, a host compliance board and a variety of loopback modules.
-
multiLane
QSFP112 Testing Solutions by multiLane
-
multiLane
QSFP-DD Test Solutions by multiLane