AGM Elettronica

AGM Elettronica develops, manufactures and markets custom built products and is a leader of the italian market of fault locators for the cable manufacturers.

  • +39 333 4288922
  • +39 081 8071249
  • info@agmel.com
  • Via Marziale, 9
    Sorrento (NA), 80067
    Italy

Filter Results By:

Products

Applications

Showing results: 1 - 5 of 5 items found.

  • Open Circuit Locator

    A994 - AGM Elettronica

    The A994 is an open circuit locator for electric and telephone cables wind on the reel; it gives the position of the fault from the inside or outside end of the cable, in percentage to the total cable length. The instrument measures the ratio of the capacitances of the two sections of failed conductor using two high precision i/v converters. The advantage of this method is due to the fact that the measurement error depends almost exclusively on the dimensional inhomogeneity of the cable. The A994 has the unique feature to permit the location of fault in cables with all broken wires. This instrument locates breaks in cables with a total capacity between 2 nF and 5 uF. The distance to fault is displayed on a large LCD display.

  • Short Circuit Locator

    A694 - AGM Elettronica

    The A694 is a short circuit locator designed for fault location in metallic cables. The instrument measures the ratio of the resistances of the two sections of failed conductor using a four-wire "Kelvin" connection, thus eliminating errors associated with contact resistances of the test leads. With the A694 you can determine if the cable has more than a short and locate the first and the last fault. The instrument locates fault with an insulation resistance up to 5 Mohms in cables that have a total resistance greater than 0.1 ohm and less than 40 kohms. The distance to fault is measured as a percentage of the total length of cable and is displayed on a large LCD display.

  • Short Circuit Locator for Power Cables

    A910 - AGM Elettronica

    The A910 is a short circuit locator designed for fault location in power cables. The instrument measures the ratio of the resistances of the two sections of failed conductor using a four-wire "Kelvin" connection, thus eliminating errors associated with contact resistances of the test leads. With the A910 you can determine if the cable has more than a short and locate the first and the last fault. The instrument locates fault with an insulation resistance up to 5 Mohms in cables that have a total resistance greater than 5mohm (approximately 90 m of 300 sqmm cable) and less than 30 kohms. The distance to fault is measured as a percentage of the total length of cable and is displayed on a large LCD display.

  • Wireless Wire Break Detection System

    A909 - AGM Elettronica

    The A909 is a wireless system that allows to detect wire breaks for cabling machines having no sliding contacts brushes.

  • Monitoring System

    A112 - AGM Elettronica

    The photoelectric sensor model A112 allows to realize a system for detecting breaks of thin wires from 10 um in diameter, with a detection range greater than 50 cm.The A112 produces these results without the use of laser technology, allowing high immunity to vibration and a secure alignment between receiver and transmitter.

Get Help